Notice: genesis_default_title is deprecated since version 2.6.0! Use Genesis_SEO_Document_Title_Parts instead. in /home/appsfree/domains/ on line 3853
10 Best Tips For Setting Up Your Router - Place4Tech

How to Set Up and Optimize Your Wireless Router

Are you currently trying to set up and optimize your wireless router?

Wireless routers might seem like they can be tricky to set up and optimize, but they aren’t. They do require you to follow a few steps but these aren’t hard at all and can be easily done within minutes.

How you set up and optimize your wireless router properly depends on the type of wireless router you have.

All wireless routers work to give you Internet access and extra network security, but how they do so are different. For instance, there are some mesh-based Wi-Fi network systems.

These are very different from other system types. This is why it’s important to know the type you have.

A wireless router is ideal for many reasons compared to other kinds of routers. One is that the signals of a wireless router tend to be stronger than other router types. If you want to reach many areas with your Wi-Fi, wireless routers are a good thing to use. Besides this, wireless routers are good for starting or rebuilding home networks. These are often simple to install compared to other types making it good for beginners. This simple installation is also good for those who want to create a new home network without having to go through a long and time-consuming process.

If you’re trying to set up and optimize your new wireless router, keeping reading this article. It will help show you the basic steps of how to quickly set up and optimize your wireless router. It will also give you some tips as to how you can best care for your wireless router.

1. Buy the Correct Router for Your Computer

The first step, buying the correct router for your computer’s system, is one of the most important steps. If you don’t buy the correct one it could end up causing problems. However, if you have a wireless router already be sure to check to see if it’s secure and still working. You can sometimes use your original router if it’s still working fine and is secure.

2. Turn Off Your Modem and Remove the Ethernet Cable

After buying the right router for your computer, turn off the computer’s modem. The modem is what the computer uses to transfer and store data. To prevent this from being affected by the router’s set up, be sure to turn it off before doing anything else.

After turning the modem off, unplug the Ethernet cable from the modem that connects to your computer. After you safely do so, connect this same Ethernet cable to your new router. This will help the wireless router to better serve your computer. When you carefully connect the cable on the router and computer, turn the modem and router on.

If you’re concerned that you might not know which port to plug the cable into, don’t worry. Often these are clearly marked on the wireless router by colors or even labels above each port telling what they are for. If you have a wireless router that doesn’t have colors or labels, don’t try to jam the cable into one of the ports. Look at the end of the cable and see which port it seems to match up to. Often this will help you to easily see where to connect the cable.

3. Work to Configure Your Wireless Router

After you turn the computer’s modem and router back on, open your browser. If you happened to turn your computer off when you were connecting your modem and router, turn it back on so you can access your browser.

When you open your browser you can type in the IP address of your wireless router in its search bar and press enter. This will then take you to a login screen. This login screen will require you to type in your computer’s administrative username and password in order to proceed with configuring your wireless router to your computer.

This screen will then take you to a setup guide. This guide will give you step-by-step instructions as to how to best configure your specific wireless router. It will help you with the configuration and to check to make sure that it is working properly.

Configuring your router can be one of the toughest steps. This is why it’s vital that you pay close attention to what type of wireless router you have. Not all wireless routers will have a step-by-step guide on your computer so be sure to look at any manuals that come with it if it doesn’t. To know more, read How does a router work.

4. Manage the DHCP and Static IPs

As you complete the steps mentioned above, you might decide you need to work with the wireless router’s DHCP and static IPs. A DHCP (Dynamic Host Configuration Protocol) works to manage all the IP router addresses on your system. You can use a DHCP to create IP addresses for your various devices so they can each work on the same network. The DHCP also helps to manage the IP addresses on your wireless router. This way you don’t have to keep constant track of them.

If you use a DHCP then you’ll want to work with static IPs as well. Static IPs are what will put the IP addresses the DHCP creates onto your devices. This helps to keep all your devices together on one network securely. Be sure that this step is done when you work to configure your wireless router.

5. Install Any Updates for Your Wireless Router

After you configure your wireless router, you’ll find that there could be some updates that it needs to have. These updates often are security ones to help prevent bugs and other problems from affecting your router.

If your router comes with these it’s important to install them so it works properly. These updates aren’t difficult to find and will usually come up when you work to configure your wireless router. Keep in mind though that if you do update your wireless router, you’ll have to turn it off after it updates and then back on again. This process will restart the router and let it start to work again but with the new updates that were installed.

6. Try to Connect to Wi-Fi

Once you configure your wireless networks and install any updates, you need to try connecting to Wi-Fi. How you connect to the Wi-Fi networks so you can access the Internet often depends on the type of wireless router you’re using. However, almost all wireless routers have a similar process for this. After you configure the wireless router look at the setup mode on it. If you find that it is not on be sure to turn it on. Also, check to see that the channel it has is on auto. If it’s not, move the channel settings to the auto mode.

If your wireless router uses lights to indicate the Wi-Fi connection this will help you a lot. You can see if you’re connected to the Internet on your wireless router by checking the light signals on it. These will help to indicate if the wireless router is connected to Wi-Fi and how strong the connection is. Different models will have different meanings with their colors and settings, but often all models will have a steady solid color to indicate that the connection is strong. If you find that the Wi-Fi light on it is blinking a little, then the connection isn’t that strong. If it’s not lit up at all that means you don’t even have a Wi-Fi connection.

Besides Wi-Fi, these light indicators will often show other connection strengths, such as Ethernet. These light indicators are useful to have as they are a visible way to help you see any connection problems.

7. Turn Your Wi-Fi On and Start to Use Your Wireless Router

After you complete the steps above, you can then turn your wireless router on and start to use it. As mentioned above, look at any lights your wireless router might have. These will indicate whether your router is working and if the signal for the Wi-Fi is strong.

Other Considerations

When setting up your wireless router there are some other considerations to keep in mind when you do so.

Changing Your Network Name

The SSID (Service Set Identifier) is the name of your Wi-Fi network and helps you to access Wi-Fi. You usually will have a network default name that comes with your wireless router. Often these default names are the names of the brand that you bought the router from. When setting up your wireless router you can work to change this default name to something else.

Encrypting Your Wi-Fi Network

Encrypting your Wi-Fi network is a good thing to do. As the wireless router is a place to store all your personal home network data, you want to make sure it is secure. To encrypt your Wi-Fi’s network system you can create a password in order for your home network to be accessed. This will help to protect your privacy. To check to see if your Wi-Fi network is encrypted look at your security settings. It will be able to show you whether your wireless router is secure or not.

General Tips

There are a few things to keep in mind when trying to set up or optimize your wireless router. Here are some general tips to consider when trying to do so.

Turn Off the Firewall If You Can’t Access the Internet

If you’re trying to connect your wireless router to the Internet but it’s still not connecting, try turning off the firewall. The firewall could be blocking the signal and preventing the router from connecting to the Internet.

Make Sure You Update Your Router and Keep It Secure

Before you buy a router be sure that it’s an updated model. Older models might not be able to properly connect to the Internet due to their settings. An updated router will contain the latest technology and will work better than an older model.

You also want to make sure to continuously check your router and make sure it’s secure. Because wireless routers work to help share home network data, they are easy targets for attacks. Be sure to keep it secure so any possible attacks don’t affect your home network’s data and security.

Change the Router’s Default Password

It’s important to change the router’s default password. As mentioned above, it’s crucial to keep your wireless router secure. The wireless router’s default password will not keep your router secure as it is a default one so it’s important that you change it after you set it up.

Know the Type of Router You Have

Even though wireless routers have the same overall purpose, they can be very different from each other. For some models, you might need to reconfigure the ISP of it. Also, some routers now use mesh-based Wi-Fi to run. It’s best to always check any directions or user manuals that come with your wireless router to make sure you are using the router that’s right for your computer’s system.

Also, when working to connect your wireless router you might find that your wireless router is an ISP one. This means instead of using a modem you’ll have to configure this router in a new way. Often ISP wireless routers tend to be a little more difficult to work with. You often have to work to configure these to different modes which is unlike many other types of wireless routers.

Place the Router in an Open Area

The purpose of your wireless router is to help all your devices easily receive Wi-Fi. However, if you place the router in an enclosed area causing it to be surrounded by many things, the Wi-Fi signal might not work well. This is why it’s ideal to place your wireless router in an open area where it can send a strong Wi-Fi signal to all the devices on your network.

Look at the Wireless Router’s Features

Before buying a wireless router it’s important to look at the features it offers. The best wireless routers will have features that help show you the speed that it will run at and how many devices it can work with. One wireless router feature to look at is the Quality of Service (QoS). The Quality of Service will help to show you the network traffic on your system. The other helpful feature to look for is a Universal Plug-n-Play (UPnP) one. This feature will allow other devices to easily connect to your network. A good place to start is our list of the best wireless routers to search a good router with a ton of feature.

Reset the Wireless Router If You Need To

If you find that your wireless router isn’t configuring correctly or connecting to Wi-Fi, reset it. Resetting is usually the last thing you want to do, but it’s often a helpful way to restart the process and prevent you from buying a new router. So, don’t worry if you don’t set up and optimize your wireless router correctly the first time. You can just reset it and start over again.


Setting up and optimizing your wireless router isn’t as hard as it might seem. A wireless router just requires a few steps and then it’s ready for you to use.

Wireless routers can help you to easily access the Internet and give you extra security when using your computer. If you are a gamer, make sure also to follow the previous steps. Our list of best routers for gaming will help you to chose the right optimized router.

Be sure to also consider the general tips mentioned in this article as they can help to ensure your wireless router works the best that it can and is secure.

Donald Bergh :